TempSensing.com.com's Modbus Enabled Temperature & Humidity Sensors

Modbus Enabled Temperature and Humidity Sensors
These sensors have an RS485 interface for Modbus-RTU and can be read using any standard Modbus-RTU Master such as our BarioNet Controller. The sensors can also be read with any 0-5V or 0-10V analog inputs such as the ones available on the Ai32, AiO8, Ai8_R13, BarioNet, or X8 modules.
(click on each product for details & pricing)
	Modbus \| Programmable \| I/O Module \| w/ LCD \| 2nd Generation Part #: MBus_Io10_LCD_G2 $ 115.00 - Click Here for Details The MBus_Io10_LCD_G2 is the 2nd Generation of the MBus_Io10_LCD. A FULLY PROGRAMMABLE Modbus I/O Device for Automation with backlit LCD and front panel buttons. The MBUS_Io10_LCD_G2 is a Programmable Modbus I/O Device that contains the followin...
	Modbus \| Programmable \| I/O Module \| with LCD Display Part #: MBus_Io10_LCD $ 114.00 $ 105.00 Save 8 % - Click Here for Details A FULLY PROGRAMMABLE Modbus I/O Device for Automation with backlit LCD and front panel buttons. The MBUS_Io10_LCD is a Programmable Modbus I/O Device that contains the following I/O Points: 1 internal thermistor 8 universal inputs (external te...
	Modbus \| CO2/Humidity/Temperature 3 in 1 Sensor \| wLCD \| Desktop Part #: MBusAO_RTH_CO2_LCD_Desk $ 239.00 - Click Here for Details The MBusAO_RTH_CO2_LCD_Desk is a 3-in-1 combination sensor used to detect, transmit, and display CO2, Humidity, and Temperature levels. The sensor values can be read in real-time over RS485 networks via the Modbus-RTU protocol; additionally, sen...
	Modbus \| CO2/Humidity/Temperature 3 in 1 Sensor \| wLCD \| Wall Part #: MBusAO_RTH_CO2_LCD_Wall $ 219.00 $ 199.00 Save 9 % - Click Here for Details The MBusAO_RTH_CO2_LCD_Wall is a 3-in-1 combination sensor used to detect, transmit, and display CO2, Humidity, and Temperature levels. The sensor values can be read in real-time over RS485 networks via the Modbus-RTU protocol; additionally, sen...
	Modbus \| CO2/Humidity/Temperature 3 in 1 Sensor \| Wall Part #: MBusAO_RTH_CO2_Wall $ 199.00 - Click Here for Details The MBusAO_RTH_CO2_Wall is a 3-in-1 combination sensor used to detect and transmit CO2, Humidity, and Temperature levels. NOTE: This sensor is the same as the ...
	Modbus \| Programmable \| I/O Module \| MBus-iO5_prog \| DataNab Part #: MBus-iO5_prog $ 99.00 - Click Here for Details A FULLY PROGRAMMABLE Modbus I/O Device which provides the maximum flexibility for your Automation needs. The MBUS_IO5_prog is a programmable Modbus I/O Device that can be used as a Modbus enabled programmable Thermostat, as a Modbus Slave I/O Dev...
	Modbus \| Configurable \| I/O Module \| MBus-iO5 \| DataNab Part #: MBus-iO5 $ 79.00 - Click Here for Details The MBUS_IO5 is a configurable Modbus I/O Device that contains the following I/O Points: 1 internal thermistor 2 universal inputs (external temp sensor, dry contact, or 0-5V input) 1 Digital Input 2 0-10V analog outputs 5 relay outputs rated f...
	Modbus \| Programmable \| I/O Module \| MBus-iO3_prog \| DataNab Part #: MBus-iO3_prog $ 89.00 - Click Here for Details A FULLY PROGRAMMABLE Modbus I/O Device which provides the maximum flexibility for your Automation needs. The MBUS_IO3_prog is a programmable Modbus I/O Device that can be used as a Modbus enabled programmable Thermostat, as a Modbus slave I/O dev...
	Modbus \| Configurable \| I/O Module \| MBus-iO3 \| DataNab Part #: MBus-iO3 $ 69.00 - Click Here for Details The MBUS_IO3 is a configurable Modbus I/O Device that contains the following I/O Points: 1 internal thermistor 1 universal input (external temp sensor, dry contact, or 0-5V input) 2 0-10V analog outputs 3 relay outputs rated for 10 Amp @ 110/22...
	Modbus Enabled \| Duct Temp/Hum Sensor \| wLCD \| 0-10V Outputs Part #: MBus_DTH_LCD $ 99.00 - Click Here for Details This Modbus enabled temperature & humidity sensor has a backlit LCD display and can communicate with a supervisory control system on an RS485 network using the Modbus-RTU protocol. The sensor also outputs two analog 0-10V signals equivalent to the...
	Modbus Enabled \| Wall-mount Temp/Hum Sensor \| wLCD \| 0-10V Out Part #: MBus_WTH_LCD $ 99.00 - Click Here for Details This Modbus enabled temperature & humidity sensor has a backlit LCD display and can communicate with a supervisory control system on an RS485 network using the Modbus-RTU protocol. The sensor also outputs two analog 0-10V signals equivalent to the...
	Modbus Enabled \| Room Temperature Sensor \| w/ 0-10V Output Part #: MBus_RT $ 69.00 - Click Here for Details This Modbus enabled room temperature sensor can communicate with a supervisory control system on an RS485 network using the Modbus-RTU protocol. The sensor also outputs an analog 0-10V signal equivalent to the current temperature, which allows the...
	Modbus Enabled \| Room Temp/Humidity Sensor \| w/Dual 0-10V Output Part #: MBus_RTH $ 89.00 - Click Here for Details This Modbus enabled room temperature & humidity sensor can communicate with a supervisory control system on an RS485 network using the Modbus-RTU protocol. The sensor also outputs two analog 0-10V signals equivalent to the current temperature & hu...